67-72 GM Truck (C/K) Professional Installation Kit for GM 12-Pin
Note: This kit is for users who want to remote mount a box or other wiring that won’t be mounted behind the gauge cluster. Most users will use this “short kit” for this vehicle. This kit is provided for users Dakota Digital, OneGauge and wish to mount control boxes in the glove box area.
Fitment:
1967-1972 Chevy / GM C10, Blazer, Suburban
Used for: Dakota Digital, Autometer Invision, Holley Pro Dash, New Vintage USA, Intellitronix and others.
This kit can used for Dakota Digital installations (VHX/HDX/RTX) that mount the control box behind the dash or directly below the steering column. Same hardware as the regular kit but with shorter wires.
Use the Digital EZ harness to give you that professional touch for your aftermarket digital gauge installation! The connector is a direct onto the GM factory 12-pin connectors in your dash. No need to hack up your OEM wiring and can be reversed in the future. Utilizing 18-AWG automotive grade TXL wire, pre labeled wires with hardware to make your install EZ. The factory connectors often have minimal length wires which makes splicing even more of a head ache. We solve that problem for you! Save time and frustration with the Digital EZ harness installation kits.
Note: Some wires won’t be used based on year of your car.
**If your car does not have a tachometer signal, be sure to add the affordable Newrad Solutions Tach Wire Kit to your order. Used for applications using ignition coil and HEI distributors. Vehicles that use and MSD box will use the tach wire from their box and won’t need this kit.
*Depending on your installation location & application extra butt connectors may be needed.
**Unused wire ends should be taped off or use shrink tubing.
*** U.S. Patent Pending
Note: This kit is for users who want to remote mount a box or other wiring that won’t be mounted behind the gauge cluster. Most users will use this “short kit” for this vehicle. This kit is provided for users Dakota Digital, OneGauge and wish to mount control boxes in the glove box area.
Fitment:
1967-1972 Chevy / GM C10, Blazer, Suburban
Used for: Dakota Digital, Autometer Invision, Holley Pro Dash, New Vintage USA, Intellitronix and others.
This kit can used for Dakota Digital installations (VHX/HDX/RTX) that mount the control box behind the dash or directly below the steering column. Same hardware as the regular kit but with shorter wires.
Use the Digital EZ harness to give you that professional touch for your aftermarket digital gauge installation! The connector is a direct onto the GM factory 12-pin connectors in your dash. No need to hack up your OEM wiring and can be reversed in the future. Utilizing 18-AWG automotive grade TXL wire, pre labeled wires with hardware to make your install EZ. The factory connectors often have minimal length wires which makes splicing even more of a head ache. We solve that problem for you! Save time and frustration with the Digital EZ harness installation kits.
Note: Some wires won’t be used based on year of your car.
**If your car does not have a tachometer signal, be sure to add the affordable Newrad Solutions Tach Wire Kit to your order. Used for applications using ignition coil and HEI distributors. Vehicles that use and MSD box will use the tach wire from their box and won’t need this kit.
*Depending on your installation location & application extra butt connectors may be needed.
**Unused wire ends should be taped off or use shrink tubing.
*** U.S. Patent Pending
Note: This kit is for users who want to remote mount a box or other wiring that won’t be mounted behind the gauge cluster. Most users will use this “short kit” for this vehicle. This kit is provided for users Dakota Digital, OneGauge and wish to mount control boxes in the glove box area.
Fitment:
1967-1972 Chevy / GM C10, Blazer, Suburban
Used for: Dakota Digital, Autometer Invision, Holley Pro Dash, New Vintage USA, Intellitronix and others.
This kit can used for Dakota Digital installations (VHX/HDX/RTX) that mount the control box behind the dash or directly below the steering column. Same hardware as the regular kit but with shorter wires.
Use the Digital EZ harness to give you that professional touch for your aftermarket digital gauge installation! The connector is a direct onto the GM factory 12-pin connectors in your dash. No need to hack up your OEM wiring and can be reversed in the future. Utilizing 18-AWG automotive grade TXL wire, pre labeled wires with hardware to make your install EZ. The factory connectors often have minimal length wires which makes splicing even more of a head ache. We solve that problem for you! Save time and frustration with the Digital EZ harness installation kits.
Note: Some wires won’t be used based on year of your car.
**If your car does not have a tachometer signal, be sure to add the affordable Newrad Solutions Tach Wire Kit to your order. Used for applications using ignition coil and HEI distributors. Vehicles that use and MSD box will use the tach wire from their box and won’t need this kit.
*Depending on your installation location & application extra butt connectors may be needed.
**Unused wire ends should be taped off or use shrink tubing.
*** U.S. Patent Pending